BIS notifies amendments to several Indian Standards under BIS Rules, 2018

Jan 14, 2020 | by Avantis RegTech Legal Research Team


The Bureau of Indian Standards (BIS) on December 20, 2019, notifies that the following Indian Standards established on December 19, 2020 shall remain in force concurrently till they are notifies as cancelled:-

1) IS/ISO 13015 : 2013 Woven Fabrics ─ Distortion ─ Determination of Skew and Bow

2) IS/ISO/IEC 14496-21 : 2006 Information Technology ─ Coding of Audio-Visual Objects Part 21 MPEG-J Graphics Framework Extensions

3) IS/ISO/IEC 14496-28 : 2012 Information Technology ─ Coding of Audio-Visual Objects Part 28 Composite Front Representation

4) IS/ISO/IEC 14496-29 : 2015 Information Technology ─ Coding of Audio-Visual Objects Part 29 Web Video Coding

5) IS 16792 (Part 1/Sec 6) : 2019/IEC 62788-1-6 : 2017 Measurement Procedures for Materials used in Photovoltaic Modules Part 1 Encapsulants Section 6 Test Methods for Determining the Degree of Cure in ethylene-Vinyl Acetate

6) IS 17000 : 2019 Sustainable Development of Habitats ─ Indicators

7) IS 17246 : 2019/ISO 3190 : 1975 Test Conditions for Turret and Single Spindle Coordinate Drilling Machines with Vertical Spindle ─ Testing of the Accuracy

8) IS 17247 (Part 1) : 2019/ISO 3686-1 : 2000 Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle ─ Testing of the Accuracy Part 1 Single Column Type Machines

9) IS 17247 (Part 2) : 2019/ISO 3686-2 : 2000 Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle ─ Testing of the Accuracy Part 2 Portal Type Machines with Moving Table

10) IS 17248 : 2019/ISO 8956 : 1986 Acceptance Conditions for Copying Attachments, Integral or Otherwise, for Lathes ─ Testing of the Accuracy

11) IS 17249 (Part 1) : 2019/ISO 11090-1 : 2014 Test Conditions for Die Sinking Electro-Discharge Machine (Die Sinking EDM) ─ Testing of the Accuracy Part 1 Single-Column Machines (Cross-Slide Table Type and Fixed-Table Type)

12) IS 17250 : 2019/ISO 14137 : 2015 Test Conditions for Wire Electrical ─ Discharge Machines (Wire EDM) ─ Testing of the Accuracy

13) IS 17251 (Part 1) : 2019/ISO 14955-1 : 2017 Machine Tools ─ Environmental Evaluation of Machine Tools Part 1Design Methodology for Energy-Efficient Machine Tools

14) IS 17251 (Part 2) : 2019/ISO 14955-2 : 2018 Machine Tools ─ Environmental Evaluation of Machine Tools Part 2 Methods for Measuring Energy Supplied to Machine Tools and Machine Tool Components

15) IS 17252 (Part 1) : 2019/ISO 15616-1 : 2003 Acceptance Tests for CO2-Laser Beam Machines for High Quality Welding and Cutting Part 1 General Principles, Acceptance Conditions

16) IS 17252 (Part 2) : 2019/ISO 15616-2 : 2003 Acceptance Tests for CO2 -Laser Beam Machines for High Quality Welding and Cutting Part 2 Measurement of Static and Dynamic Accuracy

17) IS 17253 (Part 1) : 2019/ISO 16090-1 : 2017 Machine Tools Safety ─ Machining Centres, Milling Machines, Transfer Machines Part 1 Safety Requirements

18) IS 17254 : 2019/ISO 16093 : 2017 Machine Tools ─ Safety ─ Sawing Machines for Cold Metal

19) IS 17255 : 2019/ISO/TR 16907 : 2015 Machine Tools ─ Numerical Compensation of Geometric Errors

20) IS 17256 (Part 1) : 2019/ISO/TR 17243-1 : 2014 Machine Tool Spindles ─ Evaluation of Machine Tool Spindle Vibrations by Measurements on Spindle Housing Part 1Spindles with Rolling Element Bearings and Integral Drives Operating at Speeds Between 600 min-1 and 30 000 min-1

21) IS 17256 (Part 2) : 2019/ISO/TR 17243-2 : 2017 Machine Tool Spindles ─ Evaluation of Spindle Vibrations by Measurements on Non-Rotating Parts Part 2 Direct-Driven Spindles and Belt-Driven Spindles with Rolling Element Bearings Operation at Speeds Between 600 r/min and 30 000 r/min

22) IS 17257 : 2019/ISO 26303 : 2012 Machine Tools ─ Short-Term Capability Evaluation of Machining Processes on Metal-Cutting Machine Tools

23) IS 17258 : 2019/ISO 23125 : 2015 Machine Tools ─ Safety ─ Turning Machines

24) IS 17270 : 2019 Intelligent Transport Systems (ITS) : Reverse Parking Alert System (RPAS)

25) IS 17277 (Part 1) : 2019/ISO 16092-1 : 2017 Machine Tools Safety ─ Presses Part 1 General Safety Requirements

26) IS 17316 (Part 1) : 2019/ISO 16128-1 : 2016 Guidelines on Technical Definitions and Criteria for Natural and Organic Cosmetic Ingredients and Products Part 1 Definitions for Ingredients and Products.

27) IS 17316 (Part 2) : 2019 Guidelines on Technical Definitions and Criteria for Natural and Organic Cosmetic Ingredients and Products Part 2 Criteria for Ingredients and Products

28) IS/IEC 62642-1 : 2010 Alarm Systems ─ Intrusion and Hold-up Systems Part 1 System Requirements

29) IS/IEC 62642-3 : 2010 Alarm Systems ─ Intrusion and Hold-up Systems Part 3 Control and Indicating Equipment

30) IS/IEC/TS 62642-7 : 2011 Alarm Systems ─ Intrusion and Hold-up Systems Part 7 Applications Guidelines

31) IS/IEC 62805-1 : 2017 Method for Measuring Photovoltaic (PV) Glass Part 1 Measurement of Total Haze and Spectral Distribution of Haze

32) IS/IEC 62805-2 : 2017 Method for Measuring Photovoltaic (PV) Glass Part 2 Measurement of Transmittance and Reflectance

33) IS/IEC 62820-1-1 : 2016 Building Intercom Systems Part 1 System Requirements Section 1 General

34) IS/IEC/TS 62916 : 2017 Photovoltaic Modules ─ Bypass Diode Electrostatic Discharge Susceptibility Testing

35) IS/IEC 62941 : 2016 Terrestrial Photovoltaic (PV) Modules ─ Guidelines for Increased Confidence in PV Module Design Qualification and Type Approval

36) IS/IEC 62979 : 2017 Photovoltaic Modules ─ Bypass Diode ─ Thermal Runaway Test

[Notification No. Ref: PUB/3/3/2019-20]


Bookmark

Related Updates



Alternate Text

Get updates on the go on RuleZbook Mobile App.